Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrusted Air Duct Cleaning for Leander Homeowners
Air duct cleaning in Leander, TX typically costs $350-$750 for a complete residential system and takes 2-4 hours depending on home size and duct configuration. CleanRun Duct Repair & Cleaning has served Leander since 2013, with every job starting at a written price agreed before work begins and ending with a documented photo record of every duct run. Call (737) 252-1285 for a free estimate with no obligation to schedule.
Leander’s rapid growth since 2015 has brought thousands of new homes to neighborhoods like Travisso, Crystal Falls, and Bryson. Many of these homes were built during the construction boom with flexible ductwork installed quickly to meet demand. We’ve photographed collapsed plenums (the central distribution box connecting your HVAC unit to the duct network) in Crystal Falls homes built in 2018 and found construction debris still lodged in return ducts in Travisso properties from the 2019-2021 building surge. The dust here carries limestone sediment from the Edwards Plateau, which settles differently than clay-heavy soils we see east of I-35 in Round Rock.
Our crews work under the H.A.V.E.N. Standard, with Haven Standard Clause 1 requiring a written price before any panel comes off your system. Tomas Reyes established this practice when CleanRun began in 2013, and we’ve maintained it across 52,000+ homes served. Every technician is background-checked, uniformed, and identified by name before arrival. The 365-Day Done Right Promise applies to every job in writing, not as a verbal assurance that disappears when the truck leaves.
What Our Air Duct Cleaning Service Includes
Residential Duct Cleaning
Residential Duct Cleaning covers the complete network of supply and return ducts, registers, grilles, and the main plenum in single-family homes, townhomes, and condominiums. Leander homeowners typically need this service every 3-5 years, though homes near construction zones in fast-growing areas like Palmera Ridge or Bar W Ranch often accumulate debris faster due to ongoing earthwork. CleanRun performs residential cleaning with negative-pressure extraction (a vacuum system that pulls contaminants out while agitation tools loosen debris) using Rotobrush equipment, with every duct run photographed before and after as part of our standard deliverable.
Commercial Duct Cleaning
Commercial Duct Cleaning addresses the larger-scale HVAC systems found in Leander’s retail spaces, medical offices, and multi-tenant buildings along 183A and Hero Way. These systems use heavier-gauge sheet metal and often incorporate fire dampers (safety devices that close automatically to prevent flame spread) requiring specialized handling. CleanRun’s commercial crews work after hours to minimize business disruption, using Nikro portable collectors for jobs where rooftop access is limited. We document every section with before-and-after photography and provide a written scope completion report for facility managers and property owners.
Supply Duct Cleaning
Supply ducts carry conditioned air from your HVAC unit to each room through the register vents you see on walls, floors, or ceilings. When supply ducts are obstructed, rooms heat or cool unevenly, and your system runs longer to compensate. In Leander’s summer heat, we’ve measured temperature differentials of 8-12 degrees between rooms caused by supply duct blockages. CleanRun cleans each supply run individually, using compressed air whips and rotary brushes to dislodge buildup, then verifies airflow improvement with anemometer readings (a device measuring air velocity in feet per minute) where accessible.
Return Duct Cleaning
Return ducts pull air from your living spaces back to the HVAC unit for reconditioning, making them the primary collection point for dust, pet hair, and airborne debris. Return Duct Cleaning is often overlooked because the grilles are larger and seem less prone to clogging, but the volume of air passing through means these ducts typically contain more total debris than supply lines. We’ve extracted 15+ pounds of compacted material from return systems in Leander homes with multiple pets or recent remodeling. CleanRun photographs the interior of every return run and delivers these images as part of your job record.
Full System Cleaning
Full System Cleaning encompasses supply ducts, return ducts, the plenum, blower compartment, and evaporator coil housing as an integrated service rather than isolated components. This is what most Leander homeowners actually need when they call for “air duct cleaning,” though competitors sometimes quote a low price for partial work and upsell later. CleanRun’s full system cleaning includes all accessible ductwork, register removal and cleaning, and photography of every component addressed. The written price you receive before work starts covers the complete scope, with no per-vent add-ons or surprise charges.
Video Inspection
Video inspection uses a flexible borescope camera (a thin, lighted tube with a camera tip that navigates duct interiors) to document conditions inside your ductwork before any cleaning decision is made. This service is valuable when you suspect a specific problem, such as a disconnected duct run causing a hot room, or when you want independent evidence of whether cleaning is necessary. CleanRun offers video inspection as a standalone service or included with full system cleaning, with footage saved to your job record. In Leander’s newer subdivisions, we’ve identified construction debris, pest entry points, and improperly sealed joints that homeowners would otherwise never see.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Air Duct Cleaning
CleanRun technicians are trained to service ductwork connected to all major HVAC brands without restriction. We’ve cleaned systems with Honeywell whole-house media filters installed in the return plenum, where the filter housing itself requires careful handling to prevent bypass air (unfiltered air slipping around the filter edges). Our crews understand the duct geometry specific to Trane, Carrier, Lennox, and Goodman installations, including the common plenum configurations and access panel locations that affect cleaning approach. Whether your system uses standard fiberglass ductboard, flexible insulated duct, or rigid sheet metal, we adapt our equipment and technique accordingly.
We also encounter Aprilaire humidifiers and air purifiers integrated into duct systems, particularly in Leander homes built after 2018 where indoor air quality upgrades were common. These components require protection during cleaning to prevent damage to electronic cells or water panels. Our equipment roster includes Guardsman protective covers for sensitive components. Whether you have Honeywell, Aprilaire, or any other make, we can clean your ductwork without compromising attached equipment. If you’re unsure what’s installed in your system, we identify all components during our initial inspection and note them in your written scope.
BeforeAfterSigns You Need Air Duct Cleaning Right Now
- Visible dust blowing from registers when the system starts. This indicates debris buildup in the supply ducts that’s loose enough to enter your living space. In Leander, we see this frequently in homes within a quarter-mile of active construction, where fine limestone dust infiltrates return paths and migrates to supply lines. The dust isn’t just unsightly; it deposits on coils and blower components, reducing system efficiency by forcing longer run times.
- Uneven heating or cooling between rooms that worsened gradually. A room that once cooled properly but now lags by 5+ degrees often has a partially blocked supply duct or disconnected flexible duct run. Leander’s expansive clay soils cause foundation movement that can shift duct connections in crawl spaces and attics. CleanRun’s video inspection can locate the exact point of failure without exploratory cutting.
- Musty or stale odors when the HVAC cycles on. Odors indicate biological growth or debris decay in the duct system, often in return ducts near moisture sources. In Leander’s humid spring and fall seasons, condensation in poorly insulated attic ducts creates conditions for microbial growth. The smell is your indicator that the problem is active and distributing through every room the system serves.
- Increased energy bills without corresponding rate changes or usage patterns. When ducts are obstructed, your HVAC system runs longer to achieve thermostat setpoints. We’ve documented cases in Leander where cleaning restored airflow sufficient to reduce cooling runtime by 15-20 minutes per cycle. The utility savings alone often offset a significant portion of the cleaning cost over a single summer.
- Recent remodeling or new construction in the home. Construction generates extraordinary particulate loads that bypass standard filtration. Drywall dust, in particular, is fine enough to penetrate fiberglass filters and coat duct interiors. CleanRun has cleaned systems in Leander’s new builds where the pre-occupancy “duct cleaning” performed by builders consisted of blowing compressed air through a few registers without negative-pressure containment, leaving most debris in place.
Our Air Duct Cleaning Process - Step by Step
- 1
Written price agreement before work begins. Haven Standard Clause 1 requires that you receive a complete written price covering all work before any panel is removed or tool is activated. Our technician inspects accessible components, identifies your duct configuration, and delivers a scope document with line-item pricing. No verbal estimates. No “we’ll see what we find” pricing. You approve in writing or we leave without charge.
- 2
Protective preparation and access. We lay protective coverings on floors and furniture near work areas, then remove registers and grilles for separate cleaning. The HVAC system is powered down and access panels opened to reach the plenum and blower compartment. In Leander’s attic-mounted systems, common in neighborhoods like Deerbrooke and Oak Creek, we verify safe attic access and lighting before proceeding.
- 3
Negative-pressure extraction with agitation. CleanRun connects a high-volume vacuum collector to your duct system, creating suction that contains dislodged debris. We then feed rotary brushes, compressed air whips, or skipper balls (rubber-tipped projectiles that bounce through ducts to knock loose buildup) through each duct run. The combination of mechanical agitation and continuous vacuum extraction removes adhered material rather than redistributing it. Our primary equipment includes Rotobrush brush systems and Nikro portable collectors selected for the specific duct size and material.
- 4
Component cleaning and verification. Registers, grilles, and accessible plenum surfaces are cleaned and wiped. We inspect the blower compartment and evaporator coil housing for debris migration, noting any conditions that require separate attention. Where accessible, we verify improved airflow with anemometer readings comparing before and after measurements. Every duct run is photographed with a borescope camera to document the completed condition.
- 5
Documentation delivery and system restoration. All access panels are resecured, registers reinstalled, and protective coverings removed. Your technician reviews the photo record with you, explaining what was found and what was accomplished. You receive the written scope, photo documentation, and 365-Day Done Right Promise documentation before the crew departs. The system is powered on and verified operational.
How Much Does Air Duct Cleaning Cost in Leander?
A typical residential full system cleaning in Leander runs $350-$750 for homes between 1,500 and 3,500 square feet. Smaller homes or condominiums with limited duct runs may fall at the lower end, while larger homes with zoned systems, multiple HVAC units, or extensive flexible ductwork in attic spaces typically reach the upper range. Commercial systems are priced individually based on square footage, duct complexity, and access conditions.
Several factors affect where your specific job falls in this range. The number of HVAC units matters: each additional system requires separate plenum access and equipment setup. Duct material affects labor time; rigid sheet metal cleans more quickly than flexible duct, which requires slower tool progression to avoid damage. Accessibility is significant in Leander, where homes in Crystal Falls and Travisso often have attic-mounted air handlers requiring ladder work and confined-space navigation, while older homes near Bagdad Road may have crawl space systems with limited clearance. The condition found at inspection also matters; heavy construction debris or pest contamination requires additional containment and disposal procedures.
The most important factor in cost is scope integrity. CleanRun’s price covers the complete system with no per-vent add-ons. Competitors advertising $79-$149 “whole house” specials typically clean only a few registers with a shop vacuum, then present a revised quote for actual ductwork cleaning once inside your home. This bait-and-switch pattern is so common that the Texas Attorney General has issued consumer alerts on duct cleaning scams. Our written price under Haven Standard Clause 1 is the price you pay, with no exceptions.
Every estimate is free and includes a basic visual inspection of accessible components. We do not charge to visit your Leander home, evaluate your system, and deliver a written scope. If you have a competitor’s written estimate, CleanRun provides a Free Second Opinion under the H.A.V.E.N. Standard, documenting our comparable scope and price for your review.
Air Duct Cleaning Near Leander - Our Service Area
CleanRun serves Leander directly and the surrounding communities along the 183A corridor and Highway 29 corridor. Our crews are regularly in Air Duct Cleaning in Cedar Park for homes in Ranch at Brushy Creek and Buttercup Creek, in Air Duct Cleaning in Brushy Creek for the residential areas near Cypress Creek, and throughout Jollyville, Lago Vista, Round Rock, Georgetown, Wells Branch, Lakeway, Pflugerville, Hutto, and Lost Creek. Drive time from our dispatch point to central Leander is typically 15-25 minutes, with scheduling availability that respects your preferred window rather than forcing all-day waits.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Air Duct Cleaning in Leander
Air duct cleaning is the mechanical removal of dust, debris, and contaminants from the ductwork that distributes heated and cooled air throughout your home. The process uses negative-pressure vacuum collection combined with agitation tools to dislodge buildup from duct interiors, registers, and the central plenum. For Leander homeowners, this means reduced airborne particulate, more consistent room-to-room temperatures, and less debris accumulating on blower components and coils that would otherwise require separate service.
A typical residential full system cleaning takes 2-4 hours for a single HVAC unit in a 2,000-3,000 square foot Leander home. Larger homes, multiple systems, or conditions requiring additional containment extend this timeline. Commercial jobs vary significantly based on system complexity. We schedule with specific arrival windows and notify you if inspection reveals conditions that would extend the expected duration. Call (737) 252-1285 for an exact time estimate based on your home’s specifics.
Residential full system cleaning in Leander typically costs $350-$750 depending on home size, duct configuration, and system count. CleanRun delivers a written price before any work begins under Haven Standard Clause 1, with no per-vent add-ons or post-arrival revisions. The estimate is free, and we offer a Free Second Opinion on any competitor’s written quote. Call (737) 252-1285 to schedule your inspection and receive your documented price.
Yes. CleanRun cleans ductwork connected to all HVAC brands including systems with Honeywell whole-house filters and Aprilaire humidifiers or air purifiers integrated into the duct network. Our technicians identify all components during inspection and protect sensitive elements during cleaning. We use Guardsman protective covers where appropriate and document any brand-specific handling in your job record. Equipment from Rotobrush and Nikro handles the full range of duct materials and configurations we encounter.
CleanRun does not advertise emergency or same-day duct cleaning because duct cleaning is a scheduled maintenance service, not an urgent repair. However, we maintain scheduling flexibility for situations where duct conditions have created immediate comfort or air quality concerns, such as post-remodeling contamination or verified pest intrusion. All calls are answered by a live person 24/7, and we will accommodate urgent scheduling when capacity permits. For true HVAC emergencies such as complete system failure, we recommend contacting an HVAC repair specialist first.
Every CleanRun job is backed by the 365-Day Done Right Promise: if the work is not right, we make it right. This is a written guarantee delivered with your job documentation, not a policy subject to manager approval. Haven Standard Clause 1 also protects you with the written price agreement. If you believe any aspect of the cleaning was incomplete, you contact us with your job number and photo record, and we return to address the concern at no additional cost within one year.
Clear a path to your HVAC unit, all registers, and the attic or crawl space access point. Remove fragile items from shelves near work areas where vibration might occur. Ensure pets are secured in a separate room, as the equipment noise and open doors can be stressful. You do not need to move furniture unless it directly blocks a register; our crews handle register access and replace everything as found. If you have specific concerns about certain rooms or have noticed particular symptoms, note them for the technician to address during inspection. Call (737) 252-1285 when you’re ready to schedule, and we’ll confirm any preparation specifics for your home’s layout.
Schedule Your Air Duct Cleaning Service in Leander Today
Call (737) 252-1285 to speak with a live person and schedule your free estimate. You’ll receive a written price before any work begins, a documented photo record of every duct run when the job is complete, and the 365-Day Done Right Promise in writing. CleanRun Duct Repair & Cleaning has served Leander since 2013 with no bait-and-switch pricing, no per-vent add-ons, and no exceptions to the H.A.V.E.N. Standard. The estimate costs nothing. The documentation lasts as long as you own your home.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Leander since 2013.