Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Air Quality & Sanitizing in Leander: What to Know First
We provide independent Nikro air quality and sanitizing service in Leander, typically scheduling within 3-5 business days and completing most jobs in a single visit. Every Nikro system we touch gets a written price before we start, a documented photo record of every duct run, and our 365-Day Done Right Promise in writing. Most Leander homeowners with Nikro equipment find us after a mold treatment, bacteria sanitizing, or odor removal job didn’t hold, or after they’ve compared our flat system price against per-vent quotes that balloon once the truck arrives. If you own a Nikro UV light system, air purifier, or need allergen reduction work in Leander, call (737) 252-1285 for a free estimate with no obligation.
How Nikro Products Fail - and How We Fix Them
- Nikro PS1000 and PS2000 Series Air Scrubbers: The titanium-dioxide catalyst plates in these units degrade faster in Leander’s hard water and high mineral-content environments, especially in homes off Hero Way and the Crystal Falls area where well water blends with municipal supply. The symptom is a return of musty odor within 60-90 days of “sanitizing” - because the UV-C lamp still glows, but the photocatalytic surface is spent. We test catalyst efficacy with a calibrated UV meter before quoting replacement, and we source OEM-spec plates from Nikro-compatible suppliers, not generic UV sticks that void the remaining housing warranty.
- Nikro PDH2000 Dehumidifier-Integrated Systems: The condensate drain pan on these units cracks at the corner welds after 4-6 years of Texas thermal cycling, creating a hidden reservoir where bacteria colonize behind the filter rack. Homeowners smell it before they see it - a sour, wet-cardboard note at the return grille. We pull the plenum (the main distribution box above your air handler) and photograph the pan with a borescope before touching a tool. Replacement pans from Nikro run 3-4 weeks; we keep cross-referenced aftermarket pans in stock that fit without modification and carry the same 5-year material warranty.
- Nikro HEPA-AIRE Portable Units (Model HA500 and HA1000): The gasket seal between the HEPA barrel and the blower housing compresses permanently after roughly 18 months of continuous use, which is common in Leander homes where cedar pollen season runs February through May. The unit still moves air, but unfiltered bypass defeats the point. We measure bypass with a particle counter at the discharge grille - anything above 0.3% by particle count means the gasket is done. We replace with silicone-foam gaskets rated for 10-year compression set, not the OEM neoprene that fails on the same timeline.
- Nikro UV-C Lamp Ballast Assemblies (Across All Residential Lines):strong> Ballast failure presents as intermittent lamp ignition - the UV tube flickers or won’t strike on the first call for fan. Leander’s voltage fluctuations during summer peak demand (ERCOT brownout events in 2023 and 2024 were notable) accelerate capacitor degradation in the magnetic ballasts Nikro used through 2019. We test line voltage stability at the unit and upgrade to electronic ballasts where the housing allows, cutting strike time from 8-10 seconds to under 2 and extending lamp life by roughly 30%.
- Nikro Ozone Generator OG-2500 (Commercial-Grade, Sometimes Installed in Large Leander Homes): The ceramic ozone plates craze-check from thermal shock when the unit cycles on into a cold plenum - a real issue in Leander’s shoulder seasons when nights drop to 50°F and days hit 85°F. Cracked plates produce nitrogen dioxide as a byproduct, which corrodes the aluminum ductwork visible in our cameras as white powder at the first elbow downstream. We replace plates as a set, never individually, because matched output prevents the remaining old plates from overloading. Then we run a 24-hour off-gas test before returning the system to occupied use.
Our Nikro Air Quality & Sanitizing Process
- 1
Inspection with documentation. We feed a 1080p inspection camera into every duct run (the individual branch lines from your plenum to each room) and record what we find - debris depth, moisture staining, mold growth, or UV lamp degradation. You see the footage before we quote anything.
- 2
Written price under Haven Standard Clause 1. We deliver one flat price per system, in writing, before any panel comes off. No per-vent math, no “once we’re in there” surprises. The price covers the scope we documented, period.
- 3
OEM-vs-aftermarket parts decision. For Nikro equipment still under manufacturer warranty, we use Nikro-specified components or direct equivalents that preserve coverage. For out-of-warranty systems, we present both options with the real price and longevity difference - no default to the most expensive part.
- 4
Negative-pressure extraction and treatment. We seal each duct run and apply agitation with Rotobrush contact cleaning or Nikro-compatible sanitizing agents as the scope requires. The plenum stays under negative pressure (suction that prevents debris escape) throughout.
- 5
Post-work verification. We re-camera every treated run and photograph UV lamp output with a radiometer where applicable. The before-and-after photo record goes to you as a standard deliverable, not an upsell.
- 6
Written guarantee activation. The 365-Day Done Right Promise is dated and signed before we leave. If the odor returns, the mold recurs, or the UV lamp fails prematurely, we make it right - Haven Standard Clause 5.
BeforeAfterWhat Nikro Air Quality & Sanitizing Costs in Leander
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Nikro UV lamp replacement (single lamp, residential) | $340-$520 | Ballast type (magnetic vs. electronic), plenum access difficulty |
| Nikro catalyst plate replacement (PS1000/PS2000) | $280-$440 | Plate count, housing corrosion extent |
| Full-system bacteria sanitizing with photo documentation | $680-$1,150 | System tonnage, duct run count, contamination severity |
| Mold treatment with HEPA containment | $890-$1,680 | Lab-confirmed species (Stachybotrys vs. common Cladosporium), plenum removal required |
| Nikro air purifier installation (new unit) | $1,200-$2,400 | Electrical run length, return-air boot modification, line-voltage upgrade needed |
These are whole-system prices, not per-vent teasers that triple once the crew is inside. Every estimate is free, delivered in writing, and valid for 30 days. Call (737) 252-1285 to schedule.
Why Leander Homeowners Call CleanRun Air Duct Cleaning Leander for Nikro Work
We’ve been running crews in Leander since 2013, and the Crystal Falls neighborhood in particular has taught us what cedar pollen plus new-construction drywall dust does to a Nikro system when the builder’s “final cleaning” was a shop vac at the register. Tomas Reyes, our owner, pulls the inspection camera out before quoting anything - if it doesn’t show up on screen, we don’t charge for it. That practice came from years in the Bronx and Queens, where the only thing that mattered was what you could show the customer.
Our 365-Day Done Right Promise is backed in writing on every job, not stated in marketing and forgotten after the invoice. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier air quality equipment, so if your Nikro system is part of a mixed-manufacturer setup - common in Leander homes with aftermarket upgrades - we don’t need to call a second contractor.
Every visit ends with a Documented Photo Record of every duct run, before and after. It’s how we prove the difference between real work and vacuum noise.
FAQs
No - as an independent Nikro service provider, we use Nikro-specified parts or direct equivalents that preserve remaining warranty coverage, and we document serial numbers and installation dates for your records. We are not affiliated with or authorized by Nikro, and we never represent ourselves as such. If your warranty claim requires dealer service, we’ll tell you before we start. Call (737) 252-1285 if you need help determining your warranty status.
We deliver a Documented Photo Record of every duct run, plus post-treatment air samples or UV output readings where the scope includes them. For mold treatments, we photograph the treated surface after dwell time; for UV installations, we meter actual output at the lamp surface. The photo record is included as a standard deliverable, not an extra. If you don’t receive it, the job isn’t done.
The $79-$129 coupon model typically covers a vacuum at the register and a spritz of deodorizer - no plenum access, no camera documentation, no treatment of the actual duct runs. We’ve opened systems after those visits and found the debris untouched past the first elbow. Our price covers negative-pressure extraction of every run, photographic proof, and a written guarantee. The real comparison is cost per year of actual result, not cost per visit.
Replace if the housing is cracked, the ballast has failed twice, or the unit is pre-2015 and uses obsolete lamp geometry. Repair if the issue is isolated to lamps, catalyst plates, or gaskets and the housing integrity is sound. We make this call with camera evidence, not a sales pitch, and we put both options in writing with the real 10-year cost difference. Call (737) 252-1285 for a free inspection.
UV lamps lose effective output after roughly 9,000 hours (about one year of continuous operation) - replace them annually regardless of whether they still glow. Catalyst plates in Nikro scrubbers need inspection every 18-24 months in Leander’s hard-water environment. Full-system sanitizing with photo documentation is warranted when you smell odor at the registers, see dust accumulation accelerate, or after any water intrusion event. We don’t sell maintenance contracts; we document what we find and let you decide.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Leander at CleanRun Air Duct Cleaning Leander, serving Leander and nearby areas.